Home  Sitemap  Terms

ABOUT PRODUCTS SOLUTIONS SUPPORT NEWS CONTACT

SymTech LaboratoriesMEGASQUIRT MSQ FILE REPOSITORY

Download. Share.
Upload Your MSQ File!
Switch to table view

 
Filter results  Clear filter  Edit your file

Sort By:  | Date | Name | Spark | Injector | O2 Sensor | Aspiration | Engine | Processor | Board | MAP | Firmware

1 2 3 4 5 6 7 8 Next »


SymTech Labs - MS1 - 1997 Mitsubishi Eclipse 420A      
Injector Size: 250cc/min Processor: MS1
Fuel Pressure: 45psi Firmware: MS1/Extra 029y4
Temp. Sensors: Std. GM Board: v3.0
Oxygen Sensor: Narrowband MAP: 255kPa
Spark Control: Yes Notes: This MSQ file is SymTech Labs' recommended starting point for tuning your 2.0L 420A with SymTech Labs MS1 MegaSquirt systems.
Aspiration:Naturally Asp.
Engine:  2.0L DOHC
Return to Top


SymTech Labs - MS2 - 1997 Mitsubishi Eclipse 420A      
Injector Size: 250cc/min Processor: MS2
Fuel Pressure: 45psi Firmware: MS2/Extra 3.2.5
Temp. Sensors: Chrysler Board: v3.0
Oxygen Sensor: Narrowband MAP: 255kPa
Spark Control: Yes Notes: This MSQ file is SymTech Labs' recommended starting point for tuning your 2.0L 420A with SymTech Labs MS2 MegaSquirt systems.
Aspiration:Naturally Asp.
Engine:  2.0L DOHC
Return to Top


SymTech Labs - MS3 - 1997 Mitsubishi Eclipse 420A      
Injector Size: 250cc/min Processor: MS3
Fuel Pressure: 45psi Firmware: MS3 1.2.3
Temp. Sensors: Chrysler Board: v3.0
Oxygen Sensor: Narrowband MAP: 255kPa
Spark Control: Yes Notes: This MSQ file is SymTech Labs' recommended starting point for tuning your 2.0L 420A with SymTech Labs MS3 MegaSquirt systems.
Aspiration:Naturally Asp.
Engine:  2.0L DOHC
Return to Top


Dohc Rocks - 1998 Dodge Neon      
Injector Size: 72lb/hr Processor: MS2
Fuel Pressure: 45psi Firmware: MS2/Extra 2.0.0
Temp. Sensors: Std. GM Board: v3.0
Oxygen Sensor: AEM WB MAP: 300kPa
Spark Control: Yes Notes: Set up for dual table, VE1 is <100kPa and VE3 is 105kPa+ Table is amazingly smooth and accurate !!
Aspiration:Turbocharged
Engine:  2.4L DOHC
Return to Top


Boost Junkie - 1998 Dodge Neon      
Injector Size: 750cc/min Processor: MS1
Fuel Pressure: 45psi Firmware: MS1/Extra hr10
Temp. Sensors: Std. GM Board: v2.2
Oxygen Sensor: Innovate WB MAP: 300kPa
Spark Control: Yes Notes: Built 2.0L, 20G turbo, FMIC. Tuned to 15psi boost on 93 octane. Drivability is pretty good off boost as well.
Aspiration:Turbocharged
Engine:  2.0L DOHC
Return to Top


Joe - 2fast98rt - 1998 Dodge Neon 420A      
Injector Size: 550cc/min Processor: MS2
Fuel Pressure: 48psi Firmware: MS2/Extra 2.0
Temp. Sensors: Std. GM Board: v3.0
Oxygen Sensor: Innovate WB MAP: 300kPa
Spark Control: Yes Notes: srt stage 1 injectors, static fuel pressure. srt turbo, indy intake manifold, spearco fmic. Table switching enabled at 100kpa. cranking, afterstart and warmup need tuning. Tested to 20psi.
Aspiration:Turbocharged
Engine:  2.4L DOHC
Return to Top


DOHCRT - 1998 Dodge Neon      
Injector Size: 36lb/hr Processor: MS1
Fuel Pressure: 58psi Firmware: MS1/Extra 029y3
Temp. Sensors: Std. GM Board: v3.0
Oxygen Sensor: AEM WB MAP: 300kPa
Spark Control: Yes Notes: SRT-4 turbo up to 18psi. 1:1 regulator. 93 octane fuel. All enrichments tuned decently.
Aspiration:Turbocharged
Engine:  2.0L DOHC
Return to Top


Tjabo - 1998 Dodge Neon 420A      
Injector Size: 750cc/min Processor: MS2
Fuel Pressure: 58psi Firmware: MS2/Extra 11-22-07
Temp. Sensors: Std. GM Board: v3.0
Oxygen Sensor: AEM WB MAP: 255kPa
Spark Control: Yes Notes: Injectors are RC750 saturated, turbo is an SC6152sp on a DNP tubular manifold, and cams are 18s. Runs great, but boost creeps up after about 7k.
Aspiration:Turbocharged
Engine:  2.0L DOHC
Return to Top


Christi3435 - 1997 Dodge Neon      
Injector Size: 24lb/hr Processor: MS1
Fuel Pressure: 58psi Firmware: MS1/Extra Hi-Res
Temp. Sensors: Chrysler Board: v2.2
Oxygen Sensor: Innovate WB MAP: 300kPa
Spark Control: Yes Notes: Rough warm up, slightly lean cruise, and 10 Psi boost creep on SRT turbo.
Aspiration:Turbocharged
Engine:  2.4L DOHC
Return to Top


Guhfluh - 1999 Dodge Neon 420A      
Injector Size: 1000cc/min Processor: MS1
Fuel Pressure: 30psi Firmware: MS1/Extra HR-10d2
Temp. Sensors: Std. GM Board: v2.2
Oxygen Sensor: Autometer WB MAP: 400kPa
Spark Control: Yes Notes: 30psi base fuel psi on 1:1 reg. 60-1hifi on 7:1CR 2.4L with SRT intercooler. High part throttle timing. Been run to 18psi. Wideband is custom calculations for NGK wideband.
Aspiration:Turbocharged
Engine:  2.4L DOHC
Return to Top

1 2 3 4 5 6 7 8 Next »
Please verify all settings before using any downloaded MSQ file.

By utilizing this service you are agreeing to all terms set forth within SymTech Laboratories' TERMS & CONDITIONS, COPYRIGHT NOTICES and USAGE DISCLAIMERS.  Please review our PRIVACY POLICY for information regarding how we protect your information.  Misuse of SymTech's MSQ file repository will result in permanent suspension from the services offered herein.



Copyright ©2006-2024 SymTech Laboratories. All Rights Reserved.

Home : About Us : Products : Solutions : Support : News : Contact Us
Terms : Copyright & Legal : Privacy Policy : Site Map