P0036/P0042/P0056/P0062 Heater Control Circuit

  • Ensure the oxygen sensor’s heater circuit element is within the OEM’s specifications.
  • If using the heater circuit simulator included with the iO2SS, ensure it is connected to the correct wires.
  • Inspect the wiring harness for open or short circuits.
  • Ensure the oxygen sensor heater circuit’s fuse isn’t blown.
  • If this problem persists, there may be a problem with the engine control unit (ECU).



Return to iO2SS Page

io2ss/p0036.txt · Last modified: 2012/01/18 12:38 by symtechlabs
[unknown link type]Back to top